Advanced Search
Product Categories
Liquid handling
Microtube Technologies
BioLaboratory Supplies
Electrophoresis
Radiation Safety
PCR technologies
Request BiocomDirect
Electrophoresis Catalogue
Download BiocomDirect
Electrophoresis Catalogue (1.9MB)
omniPAGE Maxi 20 x 20cm Dual, 2 sets of Glass Plates, 1mm thick bonded Spacers, 2 x 24 sample, 1mm thick combs including caster
(BCVS20DSYS)
Ideal for high resolution separations
Rapid gel casting and loading
Includes casting base
Optional low or high buffer volumes
Electrical Safety
- lid can be located in one way only. On removal, power is disconnected from buffer chamber
Versatile
- interchangeable modules for slab gel and 2-D electrophoresis as well as electroblotting using a single universal buffer tank
Rapid set up cooling
The omniPAGE range of Vertical Gel Units combines ease of use with high resolution separations. Three sizes, Mini 10 x 10cm, Mini Wide 20 x 10cm and Maxi 20 x 20cm, share a host of common features including a guaranteed leak proof seal required for trouble free, rapid and uncomplicated gel casting. Utilising a built in gel running module eliminates time consuming transfer of glass plates during casting, a process which can cause gel damage and misalignment within the glass plates. Glass plates with permanently bonded spacers guarantee perfect spacer alignment. The glass plate sandwich is simply inserted between pressure bars and a minimum of screws tightened – only one screw per side for omniPAGE Mini. This ensures fast set up times while even pressure bars and ultra soft seals guarantee leak proof casting. Once the gel has polymerised, the gel running module is simply inserted into the gel tank for electrophoresis.
omniPAGE Maxi
The preferred unit for maxi protein electrophoresis, omniPAGE Maxi unit combines convenient ease of use features with high resolution separations. Simple set up using ultra soft silicone seals guarantees trouble free glass plate loading and gel casting. Dual gaskets on the gel running insert along with notched and plain glass plates ensure leak proof gel running. Rapid set up cooling retains resolution in extended separations and also saves on buffer volume without affecting run quality.
4mm thick glass plates reduce breakage and have bonded spacers for added convenience. A wide range of accessories is available allowing many techniques to be performed using the same unit. Prep combs can be used to maximize sample loading and recovery. Accessory electroblotting and tube gel modules are available which use the same outer tank and lid.
Effective buffer cooling
- a simple to use cooling pack system ensures enhanced resolution without costly and time consuming additional equipment. No chiller, tap or obstructing connecting leads are required. The cooling pack is simply pre-chilled in a freezer and placed in the gel tank. Additionally, the use of cooling packs reduces buffer volume.
Although lid connectors are compatible with most major power supplies, adapters are available to provide complete compatibility.
CE marked in conformity with the relevant CE Safety Directives: 73/23/EEC: LOW VOLTAGE DIRECTIVE: IEC 61010-1:2001. EN 61010-1:2001; 89/336/EEC EMC DIRECTIVE: EN55011 Emissions, EN50082-1 Immunity.
For complete listing of spares and accessories for this product, please view the PDF page from the Biocom catalogue, using the link below.
TECHNICAL SPECIFICATIONS
Plate dimensions, (W x L):
20 x 20cm
Gel dimensions, (W x L):
16 x 17.5cm
Unit dimensions, (W x L x H):
26 x 16 x 28cm
Max. sample capacity:
192 samples, 48 samples per gel
Buffer volume:
Min 1200ml; Max 5600ml
Combs available:
No. of samples: 1, 5, 10, 18MC, 24, 30, 36MC, 48
Thicknesses: 0.75, 1, 1.5, 2mm
View PDF page from BiocomDirect Electrophoresis catalogue (172kb)
View complete Vertical section from BiocomDirect Electrophoresis catalogue (896kb)
View PDF page of Biocom PowerPoint power supplies (164kb)
View PDF page of Consort power supplies and Power Supply Selector (164kb)
Qty
0
Total(£)
0.00
Our Price:
£591.00
Item in stock
   
Product Inquiry
Related Products :
Home
:
About Us
:
New Products
:
Help
:
Distributors
:
Contact Us
© BiocomDirect 2006